Layout Adjustment
53
Fa
x
2
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "6 System Settings" > "Common Settings" in the Administrator Guide.
Standard Size
Select the original size from 11 options.
You can change the default options. For more information, refer to "Fax Mode Settings" (P.109).
Mixed Sized Originals (Scanning Different Size Documents
Simultaneously)
When using the document feeder, you can simultaneously send different size
documents with the sizes matching the respective sizes of the documents. You can
also specify the size of the paper so that faxes are sent at the same paper size.
Important • Originals may not be scanned correctly if the top-left corners are not aligned properly.
• Always load the A5-size documents in portrait orientation.
• When loading B5 documents together with A3 documents loaded in landscape orientation or
A4 documents loaded in portrait orientation, load B5 documents in portrait orientation.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
portrait and B4 landscape. If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle and may not be scanned properly.
Note
• Be sure to set [Original Size] on the [Layout Adjustment] screen to [Auto Size Detect] when
using mixed sized documents.
1
Select [Original Size] on the
[Layout Adjustment] screen.
2
Confirm that [Auto Size Detect] is
selected and select [Save]. If [Auto
Size Detect] is not set, select [Auto
Size Detect], and then select
[Save].
3
Select [Mixed Sized Originals].
4
Select [On].
Off
Select this item when all documents are of the same size.
On
When scanning documents of different sizes, the machine automatically detects the
size of each document.
Book Scanning (Scanning Facing Pages onto Separate Sheets)
You can scan the left and right pages of a bound document separately to fax them.
This feature is useful if you need to make separate scans for facing pages of bound
originals such as a booklet.
Note
• The document feeder does not support this feature.
• A non-standard sized document may not be properly divided into two separate pages.
