7 Machine Status
140
Mach
in
e S
tat
u
s
7
Note
• [Output Device] indicates whether or not a finisher (optional) is installed. If finisher is
installed, it is displayed as "Finisher".
[Software Version] Screen
You can check the software version.
1
Select [Software Version].
Note
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
On the [Machine Configuration] screen, you can check the following items.
Fax Receiving Mode
You can set a fax receiving mode.
For information on automatic and manual fax receiving modes, refer to "Receiving Faxes" (P.85).
1
Select [Fax Receiving Mode].
2
Select a fax receiving mode.
Manual Receive
Allows you to manually receive a fax from a remote machine. This mode is convenient
when you want to confirm the sender or use an external telephone for a telephone call
before fax reception.
Auto Receive
Automatically starts receiving a fax from a remote machine.
z
Paper Tray
z
Hard Disk
z
PCL
z
High Capacity Feeder
z
Page Memory Size
z
z
Separators/Covers Tray
z
System Memory Size
z
USB
z
Offset Stacking Module
z
Image High Compression Kit
z
Fax Main Board
z
Output Device
z
PostScript
z
Fax Extended Board 1
z
Controller ROM
z
ADF ROM
z
HCF ROM
z
Fax ROM
z
IOT ROM
z
Fax G3 Option ROM
z
Finisher C ROM
z
IPS Accelerator ROM
z
Finisher D ROM
z
SJFI
z
IIT ROM
z
SSMI
z
IIT Option ROM
