Fax Mode Settings
111
Syst
em S
e
tt
in
g
s
5
iFax Subject
Set the default value for the iFax subject. Up to 128 characters can be entered for the subject.
Fax Control
You can set the fax control settings.
Re-enter Recipients
Set whether or not to re-enter the recipient after specifying the recipient once, in order to
avoid sending a fax or an iFax to the wrong address. When Re-enter Recipients is activated,
if you specify the recipient by entering the phone number, or by selecting from the Address
Book, the screen prompting you to re-enter the recipient appears. If the same recipient has
been entered, the transmission process will start.
Re-enter Broadcast Recipients
This setting is required when you activated [Re-enter Recipients]. Set whether to allow the
Broadcast Send.
z
Enter Once Only
Allows the Broadcast Send. No need to re-enter the recipient.
z
Enter Twice
Allows the Broadcast Send. Re-entering the recipient is required.
z
Broadcast Disabled
No Broadcast Send is allowed.
Re-enter Speed Dial Recipients
This setting is required when you activated [Re-enter Recipients]. Select how to re-enter a
recipient after the first entry.
z
Enter Once Only
No need to re-enter the recipient.
z
Enter Twice
Use the speed dial feature to re-enter the recipient.
z
Re-enter Fax Number or E-mail
Specify the recipient by dialing the fax number or entering the e-mail address.
Send Header - Polling
Set whether to attach a send header to a polling document.
A “polling document” means that an original is stored in the machine's public mailbox for
polling, and can then be sent by an operation from the other end.
Documents for Polling - Auto Delete
Set whether to automatically delete a polling document after transmission.
Rotate 90 degrees
Set whether to automatically rotate a document if its image must be reduced in size unless it
is rotated.
Note
• If an arbitrary magnification is specified in [Reduce/Enlarge], automatic rotation transmission
does not function.
Mixed Sized Originals Scan Mode
If only documents of the standard sizes are to be scanned, it is recommended that you select
[Standard Size Mode].
