Fuji Xerox ApeosPort-3 C4400, Руководство пользователя

Страница: 115 / 341

Output Format
113
Co
py
3
„ Hole Punch
Sets the position for punching.
The positions for punching vary based on a finisher installed.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
• When the punching feature of a finisher is defective, paper is delivered to the center tray
instead of the finisher tray. Remove the paper delivered to the center tray every now and
then.
„ Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note • If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.
z
Upright Images
Select this item when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this item when placing the top edge of the document against the left side of
the document glass or document feeder. When you place a document in the head to
left orientation, be sure to select [Sideways Images].
„ Output Destination/Offset
Allows you to select an output destination.
Note • This function may not appear depending on the model of the machine, and optional
equipment is required for use. For more information, contact your local Fuji Xerox
representative.
ID Card Copying (Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an
ID card, onto one side of paper.
1
Place a document against the top left edge
of the document glass, and close the cover.
Important • Use the document glass when copying.
The document feeder is not available for
this feature.
• Specify the original’s orientation correctly.
• Place the card slightly away from the top-
left corner of the document glass so that
the whole image can be captured.
For the document orientations, refer to "Original
Orientation (Specifying the Orientation of Loaded
Documents)" (P.89)".
2
Select [ID Card Copying].
3
Select [On].
„ Off
Disables ID card copying.