Fuji Electric ZKMA, Инструкция по эксплуатации

Страница: 68 / 118

- 57 - INZ-TN2ZKMA-E
10.2.3 Cycle time setting of automatic calibration (option)
Description

You can set the automatic calibration cycle using this function.
The cycle starts from a specified date and time for automatic calibration.

Settable range: 00d 00h to 99d 23h (h: 00 to 23)
Procedu
re
Operation
(example)
Setting the automatic calibration so that it is performed every four days
Key operation Description
Displayed message
(LCD)
(1) Display the screen on the right in accordance with the key op-
eration summary and press the
key.
CALIBRATION MENU
SET AUTO CAL
(2)
Press the key to display the screen on the right and press
the key.
The cycle time setting of automatic calibration appears.
SET AUTO CAL
AUTO CAL. CYCLE
(3)
Use the and key to set the auto calibration starting
date and time.
Press the
key to set the value.
AUTO CAL. CYCLE
0 4 d 00 h
(4)
Press the key.
AUTO CAL. CYCLE
04 d 00 h
(5) The display returns to the screen on the right.
SET AUTO CAL
AUTO CAL. CYCLE
Note

You cannot change the setting value during automatic calibration or remote calibration.