Fuji Electric ZKMA Скачать руководство пользователя страница 63

Страница: 63 / 118

- 52 -

INZ-TN2ZKMA-E

10.1.2 Decimal point position setting screen

Description



You can set the decimal point position of full scale for oxygen concentration display using this func-
tion.



Settable range: Select one of the following.

(1) “00.00”: Displayed with two-digit integer and two decimal places.
(2) “0.000”: Displayed with one-digit integer and three decimal places.

Procedu

Operation
(example)

Setting the display of two-digit integer and two decimal places (Range 1)

Key operation

Description

Displayed message

(LCD)

(1)

Display the screen on the right in accordance with the key op-
eration summary and press the

key.

MEASURE MENU

OUTPUT RANGE

(2)

Press

the

key.

The decimal point position setting screen appears.

RANGE 1

DECIMAL POINT

(3)

Use the

key to select the two-digit integer and two deci-

mal places.
Press the

key to set the value.

DECIMAL POINT

00.00

(4)

Press

the

key.

DECIMAL POINT
00.00

(5)

When it is fixed, the display returns to the screen on the right.

RANGE 1

DECIMAL POINT

Note



If changing “0.000” to “00.00,” “25.00” is set as the full scale value.



If changing “00.00” to “0.000,” “5.000” is set as the full scale value.

Содержание ZKMA























































































































Результаты поиска

Содержание ZKMA

Отзывы:

Бренды по названию

Популярные бренды

Fuji Electric ZKMA, Инструкция по эксплуатации

Результаты поиска

Содержание ZKMA

Отзывы:

Бренды по названию

Популярные бренды