Fuji Electric PUM Series, Руководство пользователя

Страница: 46 / 77

Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
46
*3 All GP3000 models except GP-3200 series and AGP-3302B
*4 Only the COM port which can communicate by RS-422/485 (2 wire) can be used. (Except PE-4000B, PS5000)
)
" „ IPC COM Port" (page 5)
*5 Except GP-4203T
*6 All GP4000 models except GP-4100 Series, GP-4*01TM, GP-Rear Module, GP-4201T and GP-4*03T
*7 Except SP-5B00
*8 When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block
Conversion Adapter, refer to Cable Diagram 3A.
*9 Only the COM port which can communicate by RS-422/485 (2 wire) can be used.
)
" „ IPC COM Port" (page 5)
• Terminal number used for communication differs depending on the External Device
series.
Terminal numbers corresponding to each series are shown below. SG terminals are
not available for these series. Apply masking using insulation tape, etc. Implement
Type D installment to the shield connected to the FG.
Series + -
PXG4 7 8
PXG5/PXG9 1 2
PXR3 15 14
PXR4/PXR7 7 8
PXR5/PXR9 1 2