Fuji Electric Monitouch V9 Series, Руководство по устранению неисправностей и техническому обслуживанию

Страница: 32 / 145

1-20 4. Status Bar
4. Status Bar
Display Method
Advanced Model
Press two of the four corners of the V9 series unit screen one by one to display the status bar.
1. Press one corner of the screen for at least 2 seconds and release your finger when there is a
beep.
2. Then within one second, press a different corner and hold for at least 2 seconds to display the
status bar.
* If any of the items given below are placed in a corner on the screen, the system menu will not be displayed. Be
sure to press a corner where none of the items are placed. If these items are placed in all four corners of the
screen, switch the screen to one that has open corners and perform the above procedure to display the system
menu.
Switches, data display parts with switches, display areas, scrolling messages, slider switches, scroll bars,
and table data display parts
Recognition area
2 cm
2 cm
2 cm
2 cm
2 cm
2 cm
2 cm
2 cm
Recognition area
Press the upper left corner
for at least 2 seconds.
Status bar
Press a different corner for at least 2 seconds.