INVERTER SIO Driver
GP-Pro EX Device/PLC Connection Manual
34
•
The recommended connection cable is the Furukawa Electric's AWM2789 long-distance cable.
GP-4107 (COM1)
GP-4*03T
*5
(COM2)
GP-4203T (COM1)
1H
User-created cable
Cable length:
500m or less
GP4000
*6
(COM2)
GP-4201T (COM1)
SP5000
*7
(COM1/2)
SP-5B00 (COM2)
1I
RS-422 Terminal Block Conversion Adapter by Pro-face
PFXZCBADTM1
*8
+
User-created cable
Cable length:
500m or less
1B
User-created cable
LT-4*01TM (COM1)
LT-Rear Module (COM1)
1J
RJ45 RS-485 Cable (5m) by Pro-face
PFXZLMCBRJR81
Cable length:
200m or less
PE-4000B
*9
PS5000
*9
1K
User-created cable
Cable length:
500m or less
*1
All GP3000 models except AGP-3302B
*2
All ST models except AST-3211A and AST-3302B
*3
All GP3000 models except the GP-3200 Series and AGP-3302B
*4
Only the COM port which can communicate by RS-422/485 (2-wire) can be used. (Except PE-4000B, PS5000)
)
IPC COM Port (page 5)
*5
Except GP-4203T
*6
All GP4000 models except GP-4100 Series, GP-4*01TM, GP-Rear Module, GP-4201T and GP-4*03T
*7
Except SP-5B00
*8
When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block
Conversion Adapter, refer to Cable Diagram 1A.
*9
Only the COM port which can communicate by RS-422/485 (2-wire) can be used.
)
IPC COM Port (page 5)
• Depending on the operating environment, malfunctions may occur due to External
Device noise. In this case, connect the ferrite core or condenser to the cable.
Display
(Connection Port)
Cable
Remarks
Display
External Device
G
SD
DX(-)
DX(+)
FG
RDB
RDA
Ferrite core
Condenser
Pass the same-phase wires
through or turn them around
the ferrite core 2 or 3 times.
