Fuji Electric ALPHA7, Руководство пользователя

Страница: 95 / 662

CHAPTER 2 WIRING
2-48
Description of I/O Signals
2
OFF
Immediate value continuation: Sequence input signal (Reference value 22)
Positioning motion can be continued according to the next data from the target position (speed) started
in the immediate value mode.
This signal is enabled only when parameter PA1_01 (control mode selection) is set to "7" (positioning
function).
 Function
After immediate data operation starts with the first data, supply desired data in an immediate
value continuation command. Operation continues with the next data, following execution of the
first data.
回転速度
OFF
Immediate value
continuation
Time
Rotaion speed
OFF
Start positioning
OFF
Immediate value
continuation
permission
OFF
ON
In-position (level)
ON
Command position (Initial startup position)
(Position to be continued)
Command speed (Initial startup speed)
(Speed to be continued)
ABS/INC (IQ area)
(ABS/INC) (ABS/INC)
(Initial startup position) (Position to be continued)
回転速度
50ms
(Permitted again after data continuation)
Immediate value
continuation
completion