![FuehlerSysteme FS6002 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/fuehlersysteme/fs6002/fs6002_instructions-for-use-manual_2341469015.webp)
15 - 70
71130/11E/0318
5.3 Electrical installation
The WEATHER STATION is equipped with a 19-pin plug for electrical connection. A socket outlet
(mating connector) is included in the scope of supply.
5.3.1 Cable, cable preparation, connector installation
The connecting cable should have the following properties depending on the model of the device:
16 cores, core cross-section for supply and data communications 0,25mm², cable diameter max.
8.0mm, resistant to ultraviolet rays, overall shielding.
Note:
A prepared connecting cable is available for the WEATHER STATION as an
optional accessory (see accessories).
Attention:
A short-circuit at the analogue output may lead to malfunction
of the serial communication, falsification of measuring values,
and in the long term, may damage the instrument!
Outputs which are not used, should be applied to unused
terminals, in order to avoid a short-circuit among each other,
with the housing/analogue ground, or with other lines.