Temperature and Humidity Sensor
Page 13/15
700-THS3 Rev. 6 -05 May 2015
Figure 3-7
5)
Once done, select OK and the new Logging interval will be displayed in the Logging Interval
page. Return to the Home page.
3.4
Confirm Sensor Operation
Now that the THS-3 is setup, confirm its operation and ensure data is being logged.
1)
From the Home page select the Data icon to display the Data Status screen. Then select the
Table icon.
Figure 3-8: View Data
2)
If the temperature and humidity variables are not displayed, use the arrow or the scroll bar
until they come into view. Data will be displayed.
