700- LT1-SYS-IG Rev 2 22 Oct 2018
Page 4/22
SETTING UP AN LT1 STATION
Chapter 2
2.1
PRIOR TO PROCEEDING TO THE FIELD
IMPORTANT!
Prior to proceeding to the field the following MUST be completed
THE ADMINISTRATOR MUST:
Initialize FTS360 (
or login if FTS initialized FTS360 on
your behalf)
Create a Technician account for the field technician
Ensure any SDI-12 sensors to be added in the field exist in the sensor library (either
default or custom sensor)
THE FIELD TECHNICIAN MUST:
Be invited to Join FTS360 by Administrator
Download the FCA onto the smart device that will be used in the field (available in the
Apple App Store or Google Play. Search for FTS360Config)
CELL only: Provision the SIM card).
.
Ensure the APN for the SIM card is entered (Go to
the FTS Config App’s dashboard and select “Cellular”)
Test the LT1*
Log onto the FTS360 Config App, synchronize with FTS360.
DO NOT LOGOUT
Ensure the SD Card and, for cellular units, the provisioned SIM card and are inserted
Ensure any SDI-12 sensors to be added in the field exist in the sensor library
Bring the required tools (see section 1.4)
* Details of testing the LT1 are found in the LT1 User’s Manual (700-LT1-Man)
2.2
SITE SELECTION
Select a site which allows for installation of the supporting structure which is oriented so
that the solar panel will have maximum sun exposure and antennas will not be blocked by
geographical features, excessive tree canopy, or other obstructions.
