700- LT1-SYS-IG Rev 2 22 Oct 2018
Page 18/22
3)
Press the Add Fields button and select the
desired fields to be included in the message
4)
Message fields can be viewed and amended
using the Details cog. Note that if using the
App on a phone, not all columns displayed
here (tablet shown) will be visible but can be
viewed by selecting the Details cog.
The list order can be changed using the shift
up/down arrows
5)
Confirm message configuration by selecting the Show Configured Message. A simulated
message using station data will be displayed.
3.3
SYNCHRONIZE AND DISCONNECT
1). Synchronize the FCA with FTS360:
Select the Sync Data feature to save changes made
in the field with FTS360. If you are not in an area where you can access the Internet to
perform a data sync before leaving the site, as soon as you have internet access you
should open the FTS360 Config App to sync the configuration back to the FTS360.
