700- LT1-Man Rev 8 09 Feb 2021
Page 33/60
5.4.1
STATION GOES SETTINGS
Figure 5-1
First Transmission Time:
This should be minutes and seconds assigned for your transmission
time. Hours should be left blank.
Transmit Interval:
Standard transmission interval is every hour.
In the Configured Settings screen in Figure 5, transmissions will occur every hour at
25 minutes after the hour (e.g. at 04:25:00, 05:25:00, 06:25:00, etc.).
Message Centering:
Message Centering “On” is the default and is recommended to use. Message
centering takes into account the full length of the message and then places it in the middle of the
window instead of transmitting at the start of its transmission time. This helps avoid message
collisions due to a neighboring or rogue message overlapping going over its 10 second window
Send “no data” if empty:
When selected, if the buffer is empty, the message “NO DATA AVAILABLE
FOR TRANSMISSION” will be sent. This feature ensures that a transmission occurs at every
NOTE:
the information shown in the fields is for demonstration purposes only. You must use
the settings provided to you by NOAA/EUMETSAT
Unconfigured Settings
Configured Settings – Changes Saved
Содержание LT1-CELL-VZ
Страница 6: ...iv D 6 CONFORMITIES 58 D 7 RF EXPOSURE 59...
Страница 61: ...700 LT1 Man Rev 8 09 Feb 2021 Page 55 60...
