FTS LT1-CELL-VZ, Руководство оператора

Страница: 23 / 66

700- LT1-Man Rev 8 09 Feb 2021 Page 17/60
3.6 WORKING OFFLINE
If the site does not have internet connectivity, any changes made to that a station while working
offline using the FTS360 Config App will not be reflected in FTS360 until the device used at the
station is synchronized. Once you enter an area where you can access the Internet, open the
FTS360 Config App to synchronize the configuration with FTS360.
Until synchronization happens, FTS360 will operate based on the previous configuration. As such,
new data transmitted will be stored but not displayed. Once FTS360 receives the updated
configuration, the new data can be viewed.
IMPORTANT! Synchronize the FTS360 Config App with FTS360 after working offline
to ensure FTS360 and the FTS Config App have the latest configuration data.
3.7 PASSWORDS
If the station is new to your agency, the first time the FTS360 Config App connects with the station, a
password is generated. The password will be stored in FTS360 so other technicians in your agency
can access this station. See section 1.3 for details on password generation.
It is absolutely necessary that upon return from the field after setting up a new station or resetting a
station, that you synchronize the FTS360 Config App of the smart device used in the field with
FTS360 to transfer and store the password information to FTS360.
IMPORTANT! Failure to synchronize the FTS360 Config App to the FTS360 after setting
up a new station will prevent any other person in your agency from connecting to the
station.
If the smart device used to set up a new station is lost or broken before synchronization with FTS360
took place, the station will need to be returned to FTS to be factory reset. Contact FTS Support for
direction.
3.8 STATION DISCOVERY AND CONNECTING TO A STATION
Once opened, the FTS360 Config App will automatically scan for Bluetooth (LT1). A scan can also be
triggered by selecting the Scan button. All detected stations within a 50-foot range will be listed.
Select the Connect button to the desired station. If you are in a different agency to that to which the
station belongs, you will be prompted to switch agencies in order to connect. If the station is part of
an agency to which you do not belong, access will be denied.
The first time a station is connected to the FTS360 Config App, it’s identified by its serial number.