8
SMS Programming
SMS programming allows some of the parameters in the unit to be changed without having to
physically go to the unit with a programming computer
NOTE: BE VERY CAREFUL WHEN PROGRAMMING THE TXC+ USING SMS’s AS YOU CAN
STOP THE UNIT FROM FUNCTIONING CORRECTLY
Unit Description and Phone Numbers
Change the description of the TXC+ (which it uses to refer to itself in SMS’s) and the phone numbers
which it reports to.
To change the value, send the KEYWORD followed a space, followed by the new value (shown in
Italics). E.g. to change phone number 1, send
1 Phonenumber (where Phonenumber is the cell phone number)
To retrieve the value, send the KEYWORD followed by ‘?’ (no space), e.g.
1?
(to request the phone number)
Note, when requesting the phone number, the TXC+ will respond with all the stored phone
numbers.
KEYWORD
DESCRIPTION
TO CHANGE
0
Unit description
0 Name
1
Phone number 1
1 Phonenumber
2
Phone number 2
2 Phonenumber
3
Phone number 3
3 Phonenumber
4
Phone number 4
4 Phonenumber
5
Phone number 5
5 Phonenumber
6
Phone number 6
6 Phonenumber
7
Phone number 7
7 Phonenumber
8
Phone number 8
8 Phonenumber
9
Phone number 9
9 Phonenumber
10
Phone number 10
10 Phonenumber
11
GPRS fallback num
11 Phonenumber
12
Sim 1 SMS Centre number
12 +27831000002 (MTN)
13
Sim 2 SMS Centre number
13 +27829119 (Vodacom)
