311 Abbe Rd.
Sheffield Lake, Ohio 44054
Phone: 440
-
949
-
2400
Fax: 440
-
949
-
2900
Email: [email protected]
Visit us on the web at www.fsinorth.com
8. CLEANING THE FILTERS (CONT.)
8.1. FUEL TANK FILTER (pic 1)
8.1.1. Remove tank (A) cap.
8.1.2. Take out the filter (B) from the tank.
8.1.3. Clean the filter (B) from the tank.
8.1.4. Put the filter (B) back in the tank.
8.1.5. Close cap (A).
8.2. INTAKE FILTER, (pic 2) DEPENDING ON THE MODEL:
8.2.1. Take out the filter (A).
8.2.2. Remove the pipe
-
clamping straps (B).
8.2.3. Take out the pipes (C) back.
8.2.4. Replace the filter (A) with an original spare part.
8.2.5. Put the pipes (C) back.
8.2.6. Put the pipe
-
clamping straps (B) back.
8.2.7. Put the filter (A) back into its original position.
8.3. INTAKE FILTER, (pic 3) DEPENDING ON THE MODEL:
8.3.1. Remove the cup (A).
8.3.2. Take out the filter (B) from the cup. Keep gaskets for later use.
8.3.3. Clean the filter (B) with clean fuel, without damaging it.
8.3.4. Put the filter (B) back in the cup.
8.3.5. Put the glass (A) back on and reassemble the gaskets correctly.
8.4. FUEL PUMP FILTER:
See the preventive maintenance schedule.
9. STORAGE AND TRANSPORT
IN ORDER TO KEEP THE HEATER IN THE BEST POSSIBLE CONDITIONS, WE RECOMMEND TO FOLLOW THE BELOW
PROCEDURE:
9.1. Empty the fuel by removing the drain cap at the bottom of the tank (pic 5). Dispose of the fuel in an appropriate container in
accordance with the current safety regulations.
9.2. To remove any residual remaining, pour clean fuel and rinse the tank again.
9.3. Close the drain cap and the tank cap.
9.4. In order to keep the heater in the best possible conditions, we recommend
placing it in a dry and safe place.
10. CONNECTING THE ROOM THERMOSTAT
In models with a thermostat connection, remove the cap connected to the appliance and connect the room thermostat (optional)
WARNING: Before moving the appliance,
the heater must be stopped (SEE PAR.
7.3.) and disconnected from the power
supply by pulling out the plug (pic 4), wait
for a complete cool down and close the
tank cap properly to prevent fuel leakage.
Keep the heater in horizontal and stable
positon during transport.
WARNING: BEFORE PERFORMING ANY MAINTENANCE OR REPAIRS, UNPLUB HEATER FROM THE MAIN POWER
SUPPLY AND MAKE SURE THE HEATER IS TOTALLY COOL.
(1)
(2)
(3)
(4)
(5)
