CM172 & CM250 OLED Quick Start Guide
© 2015 Flanders Scientific, Inc.
1
Here are some tips to get you up and running quickly with your CM172 or CM250 OLED Monitor
Color Matching Function (CMF)
Your monitor is capable of operating with a standard CIE 1931 CMF based calibration or a Judd
Modified CMF based calibration. While most calibration systems and equipment are set up to
use the standard CIE 1931 CMF it has become very common to use the Judd Modified CMF with
OLED monitors to obtain better perceptual matching to other display technologies. You have the
flexibility to use your monitor in either CMF mode and you can make this selection from the Color
Management Menu by setting the Color Matching selection accordingly.
Display PsF as P
By default FSI monitors display Progressive Segmented Frame material on screen as Interlaced
video, much like a CRT would display such footage. However, this can lead to a flickering/jitter
effect. If you prefer to see PsF as Progressive video on screen there is an optional Video Menu
setting on the monitor that will allow you to display PsF as Progressive. Please note the following
two important considerations:
1. If possible it is always preferred to send the monitor a true progressive signal format
instead of progressive segmented frame. PsF should only be sent to the monitor if native
progressive output is not an option in your work-flow.
2. The monitor’s display PsF as P option will result in additional video processing delay
even if your signal is not PsF. For this reason is it important to return the Show PsF as P
option to Interlaced anytime you are not specifically trying to monitor PsF content as
progressive on screen.
Video Processing Speed
The monitor has multiple video processing modes. The default mode is called NORMAL. This
offers the best balance between video processing speed and ancillary function capabilities. How-
ever, if you are mainly interested in processing video as quickly as possible you can put the
monitor in FAST processing mode. This will prioritize video processing speed above all ancillary
functionality including scope update speed and menu display. These ancillary features may not
work as quickly or may display with artifacts when in fast mode, but importantly there is no loss in
actual video quality or accuracy. As stated above make sure Show PsF as Interlaced is selected
from the monitor’s video menu if the lowest overall latency is desired.
Side-by-Side (Picture and Picture)
To enable live side by side mode set PIP to a function key. By default the alternate SDI input (one
not active in full screen) will be your secondary image, settings can be changed in System Menu.
For more information on monitor operation please see the full user manual or feel free to contact
FSI directly at [email protected], via our website live chat feature, or by phone at
+1.678.835.4934 if you have any questions about your new monitor.
