FScurtis ECO Series Скачать руководство пользователя страница 48

46 

Oil-Free Scroll Compressor 4kW ~ 15kW 

Dismantling and disposal 

Following the end of its useful life, the machine 

must be dismantled and disposed of in accord-

ance with the environmental regulations. 

9.1  Safety instructions for 
dismantling and disposal 

Electrical system 

DANGER! 
Danger to life from electric power! 

Contact with live parts may prove fa-

tal. When switched on, electric com-

ponents may be subject to uncon-

trolled movements and may cause 

grave injury. 
- Before starting the dismantling,

switch off the electric power supply

and disconnect completely.

Improper dismantling 

WARNING! 
Danger of injury due to improper 
dismantling! 

Stored residual energy, angular 

components, points and edges on or 

in the machine or on the tools needed 

can cause injuries. 
- Ensure sufficient space before

starting work.

- Handle exposed, sharp-edged

components with care.

- Pay attention to orderliness and

cleanliness in the workplace!

Loosely stacked or scattered

components and tools could cause

accidents.

- Dismantle the components

properly. Note that some compo-

nents may have a high intrinsic

weight. Use hoists if necessary.

- Secure components so that they

cannot fall down or topple over.

- Consult the manufacturer if in

doubt.

9.2  Dismantling 

Before starting dismantling: 

Shut down the machine and secure to prevent

restarting.

Physically disconnect the power supply from

the machine; discharge stored residual energy.

Remove consumables, auxiliary materials and

other processing materials and dispose of in

accordance with the environmental regulations.

Then clean assemblies and parts properly and 

dismantle in compliance with applicable local oc-

cupational safety and environmental protection 

regulations. 

9.3  Disposal 

If no return or disposal agreement has been made, 

send the dismantled components for recycling. 

Scrap metals.

Send plastic elements for recycling.

Sort and dispose of other components in

accordance with their material composition.

NOTICE! 
Danger to the environment due to 
incorrect disposal! 

Improper waste disposal will dam-

age the environment 

- Electrical scrap, electronic com-

ponents, lubricants and other aux-

iliary materials must be disposed

of by authorised specialist compa-

nies.

-

If there is any question, please

contact local competent authority

or professional waste disposal

company for waste disposal da-

ta.

Содержание ECO Series























































Отзывы: