FScurtis ECO Series, Руководство оператора, Страница: 35 / 54

Oil-Free Scroll Compressor 4kW ~ 15kW
7 Maintenance
7.1 Safety instructions for
maintenance
Electrical system
DANGER!
Risk of fatal injury due to electric
power!
Risk of fatal injury in the event of
contact with live components. There
is a risk of electrical components
moving uncontrollably and causing
serious injuries after they have been
switched on.
-
Before starting work, switch off
the main power supply and
make sure that it cannot be
switched on again. Use a lock
out and tag out process.
Moving parts
WARNING!
Danger of injury from moving
parts!
Rotating parts and/or parts that make
linear movements can cause serious
injuries.
- Before beginning any mainte-
nance work on moving parts, shut
down the machine and take pre-
ventive measures to prevent re-
starting. Wait until all parts have
stopped moving.
- Wear close-fitting protective work
clothing with low tensile strength in
the danger zone.
Securing to prevent restart
WARNING!
Risk of fatal injury due to unau-
thorised restart!
In the event of an unauthorised restart
of the power supply during mainte-
nance, there is a risk of serious inju-
ries or death for persons in the danger
zone.
- Before begining work, switch off all
power supply and ensure they that
it cannot be switched on again.
Hot surfaces
WARNING!
Danger of injury from hot surfaces!
The surfaces of components could
heat up a lot during operation. Skin
contact with hot surfaces will cause
severe skin burns.
- During all work hear hot surfaces,
wear heat-resistant protective
clothing and protective gloves.
- Before all work, make sure that all
surfaces have cooled off to the
ambient temperature, wait at least
30 minutes.
Improperly performed maintenance work
WARNING!
Danger of injury due to improperly
performed maintenance work!
Improperly performed maintenance
work may lead to serious injuries and
significant material damage.
- Before begining work, there is suf-
ficient clearance assmbly.
- Keep the machine’s surroundings
tidy and clean. Loosely stacked
components, or components and
tools left lying around, are a po-
tential source of accidents. Protect
components and exposed open-
ings from dirt by covering them
with a clean cloth or kraft paper.
- Do not use flammable solvents for