FScurtis ECO Series, Руководство оператора, Страница: 33 / 54

Oil-Free Scroll Compressor 4kW ~ 15kW
5.5 Work after the initial
commissioning
Personnel:
◼
Qualified Electrician
Protective
equipment:
◼
Safety shoes
◼
Protective work clothing
◼
Protective gloves
◼
Light respiratory
protection
◼
Safety goggles
WARNING!
Danger of injury due to hot sur-
faces!
Surfaces of components can heat up
a lot during operation. Skin contact
with hot surfaces will cause severe
skin burns.
- When performing any work near
hot surfaces, heat-resistant pro-
tective clothing and protective
gloves must be worn.
- Before any work, enure that all
surfaces have cooled to the am-
bient temperature; wait at least
30 minutes.
1.
Switch off the oil-free scroll compressor and
secure it against restarting.
2.
Open and remove the enclosure panels with
the special spanner.
3.
Wait until the components have cooled.
4.
Check all coolant and compressed air lines for
leaks.
5.
Check the connectors of the components and
tighten the screws.
6.
Install the enclosure panels and ensure that
they are sealed.
NOTICE!
Risk of material damage due to
the compressor temperature
that is too low or too high!
If the compressor temperature is
too low or too high, the scroll
compressor may become dam-
aged.
- For more detailed information,
contact the manufacturer.
7.
Check the compressor temperature.
5.6 Setting parameters
Refer to the  controller documenta-
tion.