FScurtis ECO Series, Руководство оператора, Страница: 27 / 54

Oil-Free Scroll Compressor 4kW ~ 15kW
5 Installation and commissioning
5.1 Safety instructions for
installation and initial
commissioning
Electrical system
DANGER!
Risk of fatal injury due to electric
current!
Risk of fatal injury in the event of
contact with live components. There
is a risk of electrical components
moving uncontrollably and causing
serious or fatal injuries after they have
been switched on.
- Before beginning work, switch off
the power supply and ensure that
it cannot be switched on again.
Cordon off this area in accordance
with the applicable instructions
and label it accordingly.
Improper initial commissioning
WARNING!
Risk of injury due to improperly
performed initial commissioning!
In the event of improperly performed
initial commissioning there is a risk of
serious injury and material damage.
- Before initial commissioning,
ensure that all installation work
has been performed and
completed according to the
information and notes in these
instructions and the locally
applicable regulations.
Securing to prevent restart
WARNING!
Risk of fatal injury due to unau-
thorised restart!
In the event of an unauthorised restart
of the power supply during installa-
tion, there is a risk of serious or fatal
injury in the hazard zone.
- Before beginning work, switch off
the power supply and secure it
against restarting.
Improper installation and initial
commissioning
WARNING!
Risk of injury due to improperly
performed initial commissioning!
Improperly performed initial commis-
sioning may result in serious injuries
and considerable material damage.
- Before starting to work, ensure
there is sufficient clearance for in-
stallation.
- Use caution when handling ex-
posed sharp-edged components .
- Keep the machine’s surroundings
tidy and clean! Loosely stocked
components, or components and
tools lying around, are a potential
source of accidents.
- Assemble all components proper-
ly. Tighten all screws with the
specified torque.
- Eusure components cannot be
dropped and cannot fall over.
- Prior to commissioning, observe
the following:
- Ensure that all installation work
has been performed and com-
pleted according to instructions
and information included in
these instructions.
- Ensure that there is nobody in
the hazard zone.