FScurtis ECO Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 54

FScurtis ECO Series Скачать руководство пользователя страница 21

Oil-Free Scroll Compressor 4kW ~ 15kW

2.4.1 Position of the safety devices

The following illustrations show the position of the

safety devices.

ES04

ES08

ES11 ~ES15

Fig. 17: Emergency stop button (1) on the oil-free

scroll compressor

2.4.2 Description of the installed safety

devices

Emergency stop button

Fig. 18: Emergency stop button

Pressing the emergency stop button stops the

machine by switching off the power supply with an

immediate effect. After an emergency stop button

has been pressed, it must be turned and unlocked

to allow a retart.

WARNING!
Risk of fatal injury due to unau-
thorized restart!

Restarting the machine in an uncon-

trolled manner can cause serious or

fatal injuries.
- Before restarting, ensure that the

reason for the emergency stop has

been rectified and that all safety

devices are installed and in perfect

working order.

- Do not unlock the EMERGEN-

CY-STOP button until there is no

more danger.

1

1

1

«
...
19
20
21
22
23
...
»

Содержание ECO Series























































Отзывы:

Нет отзывов