FSC A320 SIDESTICK PRO OEM Скачать руководство пользователя страница 210

Страница: 210 / 329

A320 Neo Instructor Operating Station
Instructor User Guide

Control Board Footer

13 Oct 2017
Page 176

•

Excessive flight acceleration on ground (exceedance)

•

Excessive jerk (rate of change of acceleration) on ground (exceedance)

•

Unstable flight acceleration on ground (exceedance)

•

Excessive engine thrust during pushback

•

Excessive engine thrust or brakes applied during pushback (option)

This button is disabled if the aircraft has not crashed. When selected, the button
remains active for 2 seconds.

11.2.6.1.7 Clear Malfunctions

Tap this button to clear all active and armed malfunctions.

This button is disabled if there are no active or armed malfunctions.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.8 Clear Failed Stations

Tap this button to clear all stations that were failed by the instructor.

This button is disabled when there are no failed stations.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.9 Engine Exceedance

Tap this button to clear the Engine.

Displays exceedances red box (N1, N2, and EGT) by moving the exceedances into
the next DEU flight leg.

This is achieved by setting the airspeed over 80 knots for 2 seconds.

This button is disabled if engine exceedance has not occurred.

Tapping this button causes it to illuminate for two seconds.

11.2.6.1.10

Fuel Used Indicator

Tap this button to reset the Fuel Used indicator. Tapping this button causes it to
illuminate for two seconds.

Содержание A320 SIDESTICK PRO OEM










































































































































































































































































































































Результаты поиска

Содержание A320 SIDESTICK PRO OEM

Отзывы:

Похожие инструкции для A320 SIDESTICK PRO OEM

Бренды по названию

Популярные бренды

FSC A320 SIDESTICK PRO OEM, Инструкция для инструктора

Результаты поиска

Содержание A320 SIDESTICK PRO OEM

Отзывы:

Похожие инструкции для A320 SIDESTICK PRO OEM

Бренды по названию

Популярные бренды