Page
10
of
10
II. Leak Shut Off Kit
Highly absorbent capsule sits in place under the shut off lever (like a reverse
mouse trap).
It quickly absorbs water causing the capsule to expand in an upward direction
putting pressure on the shut off valve. When sufficient water has been
absorbed, the lever will snap shut, stopping the inlet water flow and saving
any possible water damage. (Best results when Plastic outer cover
REMOVED).
The Shut off valve should be connected between the FWV and the Filter
System inlet.
This system is certified to WaterMark Standards AS/NZS 3497 Under Certificate number 022780.
WaterMark certification is the level of certification required by law for a qualified plumber in
Australia to install a water filter system.
