FS PBX-C301, Руководство пользователя, Страница: 33 / 113

IP PBXs USER MANUAL
www.fs.com
29
5.5
Direct Routing
Path: Telephony -> Inbound Control -> Direct Routing
You may set up Direct Routing based on the DID numbers of your VoIP/E1/T1/BRI trunk lines and the phone numbers of the external
callers. Direct Routing has higher priority than time conditions(unless the inbound destination is a time rule) and other general inbound
routes.
Direct Routing based on DID numbers will cause the inbound calls which dialed the specified DID number to a specific call destination
without the limitation of any other inbound settings.
To add a Direct Routing rule based on DID number, please click on the "Add" button as shown below.
In the popup window, specify one of your DID numbers, and assign a call destination for all inbound calls by calling this DID number.
In the above example, 94088322 is one of your DID numbers, you may configure it with an extension number, when someone calls this
number the call will then directly go to the selected extension.
In the
Distinctive Ringtone
field you may specify the ringtone name of the phone, so when the callers call the DID number and the call
goes to this extension the phone will ring this specific ringtone. It requires the phone support distinctive ringtone feature.
To add a Direct Routing rule base on the caller’s number, please click “Add” button as shown below.
In the popup window, specify the caller’s number, and assign a call destination for inbound calls from this external phone number.