EN
OCS409 User manual
8.4
Create configuration file
After you have selected all wanted transponders, click on the
or
button.
Now select the destination drive, the USB flash drive, to store the file.
Now the data are stored on the flash drive. By connecting the drive to the USB port of OCS409
you can transfer the data and reconfigure the device.
IMPORTANT!
Do not store the configuration file in a sub directory. This file will never be found by OCS.
Creating the configuration file is now finished.
OCS409 loads the data automatically after the flash drive with the file was connected to the
USB port and reconfigures itself.
Of course the drive may contain also other data. But because of this, conventions about the
file name are very strong. So files have to be always called:
OCS409CL.HEX
Channel list files
OCS409UD.HEX
Firmware updates
8
CREATING A CONFIGURATION FILE
21
