FS M6500 Series, Руководство по настройке

Страница: 27 / 185

M6500 Series NE Configuration Manual
26
4. Click on“
Apply
”to save the configuration.
Figure2-24 NE Time configuration
2.9. Configure NE Data
Configure NE Data:

Save NE Configuration: In the case of configuring the network element, in order to prevent the
network element from abnormal restarting, the network element configuration is saved
regularly. At present, the configuration data of the network element is automatically saved once
per minute.
 Upload NE Configuration: In order to avoid data loss caused by abnormal operation, it needs to
upload the NE configuration to local NMS server regularly.
 Download NE Configuration: In order to avoid the loss or modification of the original
configuration caused by the abnormal operation of the network element by the engineer, the
previous configuration is downloaded from the local NMS server to the network element. After it
is successfully downloaded, the network element will be restarted automatically. After the
restart, the configuration will be automatically saved on the network element.

To restore NE default configuration: In the case of field debugging, various configurations of the
network element have been made. After debugging, in order to prevent some of the
configurations from being not restored, it needs to use this configuration to restore the network
element to the factory settings.
2.9.1. Save NE Configuration
Click on the NE which has been added
→
Click on“ NE Configuration ”on the right
→
Select“ Configuration Data
Save ”module and Click on“ Save ”.