Fruto TI3B, Руководство пользователя

Страница: 9 / 10

8
Ⅴ
.HOW TO CLEAN
1)
Clean after each use. Wait until the unit has cooled down.
2) If the pots/pans are used without being cleaned, this may result in
discoloration or stains.
3) Do not use benzene, thinner, scrubbing brush or polishing powder to
clean the induction cooker.
4) Wipe down the unit using a dish washing agent and a damp cloth
5) Use vacuum cleaner to suck up dirt from the air intake and exhaust
vent.
6) Never run water over the unit (If water gets inside it may cause
malfunction).
WARNING: any other servicing should be performed by an authorized
service representative.
Error Code List
–
If LED-display shows the error code, please reference to the solution
as following.
Error Code Cause and Solution
“---“ on
display and
sounded
No suitable pot or no pot on the induction.
After pressing POWER key, press HEAT key to start the unit.
E1 Voltage is under 75V
E2 Voltage is over 145V
E3 IGBT in short circuit. Please contact the nearest authorized
service facility for trouble shooting, repair and adjustment.
E4 Temperature sensor is defective. It may be caused by a
concave pot. Change pot and restart the induction. If the
error code still shows, please contact the nearest authorized
service facility for trouble shooting, repair and adjustment.
E5 The temperature sensor underneath the cooking area is
defective or there is a short circuit. Please contact the nearest