Frontier SB1388, Руководство оператора

Страница: 9 / 60

SAFETY PRECAUTIONS- continued
OM 0437SB1388-A
7
Snowblower Operation
1.
Before leaving the tractor/snowblower
unattended, take all possible precautions.
Park the tractor/snowblower on level
ground, place the transmission in neutral,
set the parking brake, disengage the PTO,
lower the snowblower to the ground, place
all levers including auxiliary control levers
in neutral, shut off the engine and remove
the ignition key.
2.
Before starting the tractor/ snowblower,
remove the ice that might have
accumulated on the auger/fan, inspect and
clean every rotating part.
3.
Prior to operation, clear work area of all
objects that can be picked up and thrown.
Mark all curbs, pipes, etc. that cannot be
moved.
4.
Be sure the PTO switch/lever is in
OFF/disengaged position before starting
engine.
5.
Exercise extreme caution when operating
on or crossing a gravel drive, walks, or
roads. Stay alert for hidden hazards or
traffic.
6.
Do not carry passengers.
7.
Keep clear of all rotating parts. Do not put
hands or feet under, or into snowblower
with engine running. Be especially
observant of the snowblower areas of
discharge, intake or all other mechanical
motions.
8.
For your safety, do not work under any
hydraulically supported machine elements
that may creep down, suddenly drop or be
accidentally lowered.
9.
Park the tractor/snowblower on level
ground, place the transmission in neutral,
set the parking brake, disengage the PTO,
lower the snowblower to the ground, place
all control levers in neutral, shut off the
engine, remove the ignition key and allow
the rotating parts to stop BEFORE
unclogging the housing or the chute and
making any repairs, adjustments or
inspections. Use only a 36" long stick of
wood to unclog the snowblower.
10.
If the snowblower starts to vibrate
abnormally, disengage the PTO, stop the
engine immediately and check for cause.
Excessive vibration is generally a sign of
holeble.
11.
Do not run the engine indoors except when
starting engine and transporting attachment in
or out of building. Carbon monoxide gas is
colorless, odorless and deadly.
12.
Do not attempt to operate on steep slopes. If
operating on slopes is necessary, exercise
extreme caution when changing direction.
13.
Never operate snowblower without guards,
and other safety protective devices in place. All
tractor and snowblower shields and covers
must be correctly installed at all times. When
necessary to remove these, they must be
reinstalled immediately.
14.
Never operate snowblower near glass
enclosures, automobiles, window wells,
embankments, etc., without proper adjustment
of snow discharge angle.
15.
Never operate machine at high transport
speeds on a slippery surface.
16.
Use extra caution when backing up.
17.
Disengage power to auger/fan when
transporting or when not in use.
18.
Never operate the snowblower without good
visibility and lighting.
19.
Prolonged exposure to loud noise can cause
impairment or loss of hearing. Wear a suitable
hearing protective device such as earmuffs or
earplugs to protect against objectionable or
uncomfortable noises.
20.
Never allow anyone near the work area.
21.
Never allow anyone to operate the snowblower
until they have read the manual completely
and are thoroughly familiar with basic tractor
and snowblower operation.
22.
Make sure the tractor is counterweighted as
recommended by your dealer. Weights provide
the necessary balance to improve stability,
traction and steering.
23.
Always make sure all snowblower components
are properly installed and securely fastened
BEFORE operation.
24.
Adjust housing height to clear gravel or
crushed rocks surface.
25.
Keep away from chute discharge. This chute
has the capacity to throw debris at far
distances.
26.
Never direct chute discharge towards people
or animals. A thrown debris can cause serious
injury.