GAS HOOK UP
CONNECTION
(cont.)
5. When connecting regulator assembly to
the valve, hand tighten the quick coupling
nut clockwise to a complete stop.
DO NOT
use a wrench to tighten
. Use of a
wrench may damage the quick coupling
nut and result in a hazardous condition.
6. Open the tank valve fully (counter-
clockwise). Use a soapy water solution
to check all connections for leaks before
attempting to light the grill, see below. If
a leak is found, turn the tankvalve off
and do not use the grill until a local L.P.
gas dealer can make repairs.
TO DISCONNECT L.P. GAS CYLINDER:
1. Turn the burner valves OFF.
2. Turn the tank valve OFF fully (turn
clockwise to stop).
3. Detach the regulator assembly from the
tank valve by turning the quick coupling
nut counter-clockwise.
12
continued
FINAL CHECK LIST
√
Specified clearance maintained
24" (61 cm) from combustibles.
√
All internal packaging removed.
√
Knobs turn freely.
√
Burners are tight and sitting
properly on orifices.
√
Pressure regulator connected and
set. Gas connections to grill using
hose & regulator assembly provided
(pre-set for 11.0" water column).
√
Unit tested and free of leaks.
√
User informed of gas supply shut
off valve location.
USER, PLEASE RETAIN THESE
INSTRUCTIONS FOR FUTURE
REFERENCE.
PROPANE CYLINDER CAUTIONS
a)
DO NOT store a spare LP-gas
cylinder under or near this
appliance.
b)
NEVER fill the cylinder beyond 80
percent full.
c)
If the information in "a" and "b" is
not followed exactly, a fire causing
death or serious injury may occur.