TO MATCH – LIGHTING THE GRILL
If the burner will not light after several attempts, a burner can be match lit. If you have just
attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to
dissipate before attempting to match light the grill.
Keep your face and hands as far away from the grill as possible. Insert a lit extended
match or extended length lighter through the cooking grids to the burner you choose to
light. Press the burner control knob and rotate left to the HI setting. Continue to press the
knob in until the burner igniters. The burner should light immediately. If the burner does not
light in 4 seconds, turn the knob OFF, wait 5 minutes and try again.
Always turn the control knobs to the OFF position when not in use.
If the grill will not light after several attempts, check the Troubleshooting section of
this manual (p. 16-17).
Place a match in-between
the lighting rod, then insert
through the cooking grids to
the burner you have chosen
to light.
9
Section Three
