Back Of Rack
6
11
TBMK011_REV_A02
3
FIT AND SECURE
2
2.1
2.2
2.3
13MM
Taking into account the length and width of
your tent, choose where you'd like to
position it on the rack. This will determine
where you will need to fit the Mount
Brackets (Item 1 & 2).
Loosely fit the Mount Brackets (Item 1 & 2)
to the rack using fasteners 12, 13 and 14.
Note that position of the Mount Bracket With
Latch orientation. Mount as shown in Step 2.1.
Make sure that the closed side of the
Mount Brackets are facing toward the
front of the rack and that they are
parallel to the side of the rack.
13MM
Measure the distance between the center
points of the Rack Mount Brackets. You will
need this measurement for fitting the Latch
Bracket assembly to the tent channel in Step
2.5.
The Tent Channel Nut Plates included were
designed for the following tents but will
also work with other popular tents.
Check your mounting channel measurements
for the appropriate size.
All Channel Nut Plates are 6mm thick.
1. Front Runner
2. Autohome
3. James Baroud
CENTER
2LH
1RH
1RH
2LH
1
2
3
23.5mm
0.93"
"7
3.3
/
m
m5.
58
"6.
3 /
m
m5.
19
29.5mm
1.16"
"8.
3 /
m
m5.
69
34.5mm
1.36"
Right Hand Mount
2RH
Left Hand Mount
2LH
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
13
12
2LH
14
2LH
1RH
FRONT
