Fronius TXi TWIN, Руководство по эксплуатации

Страница: 28 / 68

28
33 Cleaning motor bottom/"Cleaning error"
Signal is only available in conjunction with the Robacta Reamer V Twin and Ro -
bacta TC devices.
"Cleaning motor bottom" signal only on Robacta Reamer V Twin:
- Cleaning motor at the bottom
"Cleaning error" signal only for Robacta TC devices:
- Error during cleaning
34 Cleaning motor top
Signal is only available on the Robacta Reamer V Twin:
- Cleaning motor at the top
35
Cut the wire electrode
Signal is only available in conjunction with the Robacta Reamer V Twin and Ro -
bacta TC devices:
- Activates the wire cutter
36 Reserve
37 Reserve
Assignment of I/O
connection for
add-on devices
CAUTION!
Danger of damage to the connection power supply due to overcurrent.
► Provide the power supply with 1.5 A fuse protection against overcurrent.
NOTE!
To avoid interference, keep the line length between the torch body change station
and the robot controller as short as possible.
1 +24 V
2 GND
3 -
4 -
5 -
1
2 3
4
5