Fronius TransTig 1700, Руководство по эксплуатации

Страница: 38 / 124

Key combinations - special functions
General The following functions can be called up by pressing buttons simultaneously or
repeatedly on the MagicWave and TransTig control panels.
Displaying the
software version,
operating time
and coolant flow
Display software version:
while pressing and holding the Mode button, press the left
parameter selection button.
The software version appears on the digital displays.
Display operating time:
press the left parameter selection button again
The operating time records the actual arc burning time since
starting for the first time.
For example: "654 | 32.1" = 65,432.1 hours = 65,432 hours |
6 mins
IMPORTANT!
The operating time display is not suitable as a
basis for calculating hiring fees, guarantee, etc.
Display coolant flow (only in conjunction with a cooling unit
with the flow sensor option):
press the left parameter selection button again
The current coolant flow of the cooling unit is shown in
l/min (CFL =
C
oolant
Fl
ow)
If the coolant flow is less than 0.7 l/min, the power source
switches off after the end of the time specified in welding
parameter C-t and the error message "no | H2O" is shown.
To exit, press the Mode button.
38