Fronius TransSteel 2200, Руководство по эксплуатации

Страница: 129 / 136

2
Reduce the power or amperage value correspondingly so that the device can oper-
ate without a cool-down phase.
TransSteel 2200
Grid voltage (U
1
) 1 x 230 V
Max. effective primary current (I
1eff
) 16 A
Max. primary current (I
1max
) 26 A
Mains fuse protection 16 A slow-blow
Max. apparent power (S
1max
) 5.98 kVA
Mains voltage tolerance -20 / +15%
Grid frequency 50 / 60 Hz
Cos phi (1) 0.99
Max. permitted grid impedance Z
max
on PCC
1) 250.02 mOhm
Recommended residual-current circuit breaker Type B
Welding current range (I
2
)
MIG/MAG 10 - 210 A
MMA 10 - 180 A
TIG 10 - 230 A
Welding current at 10 min / 40 °C (104 °F) 30% 60% 100%
MIG/MAG U
1
230 V 210 A 170 A 150 A
Welding current at 10 min / 40 °C (104 °F) 35% 60% 100%
MMA U
1
230 V 180 A 150 A 130 A
Welding current at 10 min / 40 °C (104 °F) 35% 60% 100%
TIG U
1
230 V 230 A 200 A 170 A
Output voltage range according to standard characteristic (U
2
)
MIG/MAG 14.5 - 24.5 V
MMA 20.4 - 27.2 V
TIG 10.4 - 19.2 V
Open circuit voltage (U
0
peak / U
0
r.m.s) 90 V
Protection class IP 23
Type of cooling AF
Overvoltage category III
Pollution degree according to IEC60664 3
EMC device class
A
2)
Safety markings S, CE
Dimensions l x w x h 560 x 215 x 370 mm
22.05 x 8.46 x 14.57 in.
129
EN-US