![Fronius TransPocket 4000 CEL Скачать руководство пользователя страница 61](http://html1.mh-extra.com/html/fronius/transpocket-4000-cel/transpocket-4000-cel_operating-instructions-manual_2339431061.webp)
Safety rules
Explanation of
safety notices
DANGER!
Indicates immediate danger.
▶
If not avoided, death or serious injury will result.
WARNING!
Indicates a potentially hazardous situation.
▶
If not avoided, death or serious injury may result.
CAUTION!
Indicates a situation where damage or injury could occur.
▶
If not avoided, minor injury and/or damage to property may result.
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.
General
The device is manufactured using state-of-the-art technology and according to
recognised safety standards. If used incorrectly or misused, however, it can cau-
se:
-
injury or death to the operator or a third party,
-
damage to the device and other material assets belonging to the operating
company,
-
inefficient operation of the device.
All persons involved in commissioning, operating, maintaining and servicing the
device must:
-
be suitably qualified,
-
have sufficient knowledge of welding and
-
read and follow these operating instructions carefully.
The operating instructions must always be at hand wherever the device is being
used. In addition to the operating instructions, attention must also be paid to any
generally applicable and local regulations regarding accident prevention and en-
vironmental protection.
All safety and danger notices on the device
-
must be in a legible state,
-
must not be damaged,
-
must not be removed,
-
must not be covered, pasted or painted over.
For the location of the safety and danger notices on the device, refer to the sec-
tion headed "General" in the operating instructions for the device.
Before switching on the device, rectify any faults that could compromise safety.
This is for your personal safety!
61
EN
Содержание TransPocket 4000 CEL
