Fronius Symo GEN24 10.0, Руководство по эксплуатации, Страница: 58 / 120

General com-
ments regarding
multiple MPP
trackers In the case of inverters with multiple MPP trackers, there are two independent PV inputs
(MPP trackers) available. These can be connected to a different number of modules.
When using for the first time, set up MPP TRACKER according to the respective config-
uration (also possible later in the menu area "Devices and system components" under
the menu item "Inverter").
Multiple MPP
tracker configura-
tion 6-10 KW
DC ( 25 A)
-
+
PV 1
Total current (I
dcmax
) less than or equal to 25 A
MPPT settings:
PV1: ON
PV2: OFF
DC ( 25 A)
- -
+ +
+
-
PV 2
PV 1
Combined solar module strings with total current
(I
dcmax
) less than or equal to 25 A
MPPT settings:
PV1: ON
PV2: OFF
DC
(>25 A / 48,75 A)
- -
+ +
-
PV 2 P
PV 1
+
-
+ +
-
Combined solar module strings with total current
(I
dcmax
) greater than 25 A
MPPT settings:
PV1: ON
PV2: ON
PV1 + PV2 (connected in parallel): ON
IMPORTANT!
The maximum current load of a single ter-
minal is 25 A. PV connection strings with a
total current (I
dcmax
) of more than 25 A
must be split between both PV inputs
upstream of the terminals (≤ 48.75 A).
Splitting the current by bridging from PV 1
to PV 2 at the terminal is not permitted.
58