Fronius Selectiva Li 16 kW 8210, Руководство по эксплуатации, Страница: 55 / 60

Selectiva 18 kW
Li-Ion
WARNING!
An electric shock due to a fault current can be fatal.
Nothing other than a type B residual current circuit breaker should ever be used
for connecting the device to the mains.
Mains voltage (-10% / +10%)
1)
Optional:
3~ NPE 400 V / 50/60 Hz
3~ PE 400 V / 50/60 Hz
Mains fuse protection
2)
Selectiva 2250 / 2320
Selectiva 4260 / 4300 / 4325 16 A / 32 A
3)
32 A
Minimum mains lead cross section
Selectiva 2250 / 2320
Selectiva 4260 / 4300 / 4325
4 mm² (0.0062 in²)
6 mm² (0.0093 in²)
Duty cycle 100%
EMC device class B
Protection class 1
Max. permitted mains impedance Z
max
on
PCC
4)
According to the "Device-spe-
cific data" table below
Degree of protection
5) IP 20
Overvoltage category III
Operating temperature
6) -20 °C to +40 °C
(-4 °F to 104 °F)
Storage temperature -25 °C to +80 °C
(-13 °F to 176 °F)
Relative humidity maximum 85%
Maximum altitude above sea level 2000 m (6561 ft.)
Mark of conformity according to rating plate
Product standard EN62477-1
Dimensions l x w x h 785 x 247 x 392 mm
(30.91 x 9.72 x 15.43 in.)
Weight (with standard mains and charging
leads) 47 kg (103.62 lb)
Pollution degree 3
1) The device is approved for operation on neutral-earthed mains networks
with a maximum outer conductor nominal voltage of 400 V.
2) The earth leakage current is less than 3.5 mA.
3) Selectiva 2250 / 2320: If the charger is protected by a 32 A fuse, the
thermal stress of the automatic circuit breaker must not exceed 210000
A
2
s.
4) Interface to a 230/400 V, 50 Hz public grid
5) For indoor use only, do not expose to rain or snow
6) A high ambient temperature may result in power degradation (derating).
55
EN