Fronius Selectiva Li 16 kW 8210, Руководство по эксплуатации, Страница: 54 / 60

Selectiva 16 kW
Li-Ion
WARNING!
An electric shock due to a fault current can be fatal.
Nothing other than a type B residual current circuit breaker should ever be used
for connecting the device to the mains.
Mains voltage (-10% / +10%)
1)
Optional:
3~ NPE 400 V / 50/60 Hz
3~ PE 400 V / 50/60 Hz
Mains fuse protection
2) 32 A
Minimum mains lead cross section 6 mm² (0.0093 in²)
Duty cycle 100%
EMC device class B
Protection class 1
Max. permitted mains impedance Z
max
on
PCC
3)
According to the "Device-spe-
cific data" table below
Degree of protection
4) IP 20
Overvoltage category III
Operating temperature
5) -20 °C to +40 °C
(-4 °F to 104 °F)
Storage temperature -25 °C to +80 °C
(-13 °F to 176 °F)
Relative humidity maximum 85%
Maximum altitude above sea level 2000 m (6561 ft.)
Mark of conformity according to rating plate
Product standard EN62477-1
Dimensions l x w x h 647 x 247 x 392 mm
(25.47 x 9.72 x 15.43 in.)
Weight (with standard mains and charging
leads) 36.8 kg (81.13 lb)
Pollution degree 3
1) The device is approved for operation on neutral-earthed mains networks
with a maximum outer conductor nominal voltage of 400 V.
2) The earth leakage current is less than 3.5 mA.
3) Interface to a 230/400 V, 50 Hz public grid
4) For indoor use only, do not expose to rain or snow
5) A high ambient temperature may result in power degradation (derating).
Device-specific data
Device Max. AC
current Max. AC
power Nominal
voltage Max. char-
ging cur-
rent Z
max
Selectiva
8210 30.7 A 18,350 W 80 V 210 A 74
mOhm
54