Fronius Selectiva Li 16 kW 8210, Руководство по эксплуатации, Страница: 43 / 60

Reset settings The menu item below "General options" offers two alternative ways of resetting
all the settings:
Reset Factory Settings:
- Resets to factory settings.
Reset Default Settings:
- Resets settings to the manufac-
turer's defaults.
USB mode
In USB mode, the display shows
whether or not a USB flash drive is
connected.
The USB flash drive must conform to
the following specifications:
- Formatting: FAT32
- 32 Gigabyte maximum
- Non multi-partitioned
The I-SPoT VIEWER software supports the visualisation and evaluation of data
on the USB flash drive. The I-SPoT VIEWER software can be found online at the
following address: http://www.fronius.com/i-spot.
Only insert the USB flash drive when charging is not in progress or if the charging
process has been interrupted.
If the charging process is only interrupted, not completed, it is only possible to
read out data. A new update or configuration cannot be loaded.
1
Use the "Stop/Start" key to access the following settings
2
Use the "Up/Down" keys to scroll between the settings
3
Use the "Stop/Start" key to confirm the desired setting
A USB flash drive may be connected while charging is in progress, after the
"Stop/Start" key has been pressed. However, this can only be to read out data. An
update or new configuration cannot be loaded.
43
EN