Warning notices
inside the device
WARNING!
Danger from electrical current.
This may result in serious injuries or death.
▶
The housing must never be opened by anyone other than a service technician
trained by the manufacturer.
▶
Before starting work, switch off all the devices and components involved and discon-
nect them from the grid.
▶
Secure all the devices and components involved to prevent unintentional restarting.
▶
After opening the device, use a suitable measuring instrument to check that electric-
ally charged components (such as capacitors) have been discharged.
▶
Use an easily legible and understandable warning sign to ensure that the device is
not reconnected to the mains supply before all the work has been completed.
(4)
(5)
(+)
( - )
(1)
(2)
(3)
RCS 3.0
Lights
1
2
3
4
12V
GREEN
YELLOW
RED
BLUE
Temp. Sensor
Ext. Start/Stop
WARNING
Hazardous Voltage
Kondensator Entladezeit < 3 min.
Capacitor discharge time < 3 min.
Décharge de condensateur < 3 min.
Condensador tiempo de descarga < 3 min.
Condensatore tempo di scaricamento < 3 min.
Risk of Electric Shock!
Do not operate at circuits
more than 250 V to ground!
0... 30V
DC/4A
0... 250V
AC/4A
Use Copper Conductors Only!
C
Common
NC
Normally Closed
NO
Normally Opened
L
Line
N
Neutral
Wire
max. 1A
AC Output!
42,0409,0008
C NC NO
C NC NO
C NC NO
L/C NC NO N
WARNING!
Setup regulations
WARNING!
Danger from devices falling or toppling over.
May result in serious injuries or death.
▶
Set up all system components in a stable position. When using a floor bracket or
wall bracket, always ensure that all fastening elements are firmly seated.
▶
Devices weighing more than 25 kg (55.12 lb.) must be carried by at least 2 persons.
▶
When mounted on a shelf, the load capacity of the shelf must at least correspond to
the weight of the device.
13
EN
