Fronius RC Panel Basic, Руководство по эксплуатации

Страница: 27 / 124

27
EN
General
Safety
WARNING!
If the equipment is used or tasks are carried out incorrectly, serious injury or dam-
age may result.
► All activities described in this document must only be carried out by trained and quali-
fied personnel.
► All functions described in this document must only be used by trained and qualified per-
sonnel.
► Do not carry out any of the work or use any of the functions described until you have
fully read and understood the following documents:
this document,
all the Operating Instructions for the system components, especially the safety rules.
Device concept The remote control can be used with the following system components:
RC Panel Basic with SpeedNet connection socket
-
System components from the TPS/i series
RC Panel Basic /BT
-
System components from the TPS/i series
- System components from the TT/MW series (with Bluetooth function)
- Only in certified countries
RC Panel Basic TIG/TMC with TMC connection socket
-
System components from the TT/MW series (with TMC connection socket)
- System components from the TP series (with TMC connection socket)
When using the remote control, the parameters are set and functions selected depending
on the welding process and power source.
NOTE!
As a result of firmware updates, you may find that your device has certain functions
that are not described in these Operating Instructions, or vice versa.
Certain illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.