Fronius Primo 10.0-1 208-240, Руководство по установке

Страница: 6 / 52

Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in severe personal injury and damage to property.
▶
Only qualified personnel are authorized to commission your inverter and only
within the scope of the respective technical regulations.
▶
Read the Installation Instructions and Operating Instructions before in-
stalling and commissioning the equipment.
WARNING!
Danger due to a ground fault. A normally grounded conductor can become un-
grounded and live due to a ground fault.
An electric shock can be fatal.
▶
A ground fault must be repaired before operation is resumed.
WARNING!
Danger of DC voltage from solar modules. When solar modules are grounded,
the inverter's insulation monitoring is deactivated.
An electric shock can be fatal.
▶
Ensure that grounded solar modules are double insulated according to
Safety Class II.
▶
Attach corresponding safety labels to the photovoltaic system where they
can be seen easily.
▶
Set the inverter so that an error message is displayed if the fuse trips.
Fire prevention
CAUTION!
Danger from faulty or incorrect installations.
They may result in damage to inverters and other current-carrying components
of a photovoltaic system.
Faulty or improper installation may cause overheating of cables and terminals as
well as the formation of arcs. This could cause thermal damage, which in turn
may lead to fires.
Please note the following when connecting the AC and DC cables:
▶
Securely tighten all terminals using the proper torque listed in the Operating
Instructions
▶
Securely tighten all grounding terminals (PE/GND) using the proper torque
listed in the Operating Instructions, even for free grounding terminals
▶
Do not overload cables
▶
Check cables for damage and correct wiring
▶
Follow all Safety Instructions, Operating Instructions, and any local connec-
tion regulations
▶
Always secure the inverter to the mounting bracket with fixing screws using
the torque specified in the Operating Instructions.
▶
Only start up the inverter with the fixing screws tightened.
NOTE!
Follow general ESD guidelines when handling option cards.
6