20
Operating modes
Manual cleaning
“Manual Cleaning” mode serves for removing tarnish discoloration. The Electrolyte is dis
-
pensed when the button is pushed on the cleaning handle (polishing not possible)
Current curve: AC
Auto cleaning
“Auto-Cleaning” mode serves for removing tarnish discoloration. The electrolyte is auto
-
matically dispensed during cleaning. Adjustement of the desired dispensing rate with dial
for electrolyte dispensing rate (5). No need to push the button! (Polishing not possible)
Current curve: AC
Polishing / bur
-
nishing
“Polishing / Burnishing“ mode serves for polishing (burnishing) the workpiece after clean
-
ing. The electrolyte is dispensed when the button is pushed on the cleaning handle
Current curve: DC
Printing
“Printing” mode serves for electrochemical printing of CrNi parts (e.g. graphics or company
logos).
Current curve: AC
