manualshive.com logo in svg

Fronius MagicCleaner 150, Руководство по эксплуатации

Поделиться
Скачать
Fronius MagicCleaner 150 Скачать руководство пользователя страница 38

Polishing

General

WARNING!

Danger due to improper use!

This can result in serious personal injury, damage to property and the environment.

▶

Observe the safety data sheets of the cleaning electrolytes!

▶

Observe Safety Instructions from page 

20

!

Electrochemical polishing of welds is carried out with:

Cleaning electrolyte red 0.1 l

42,0510,0380

Supply of the cleaning electrolyte via the cleaning torch and the hand pump.

NOTE!

The same cleaning electrodes are used for polishing as for cleaning.

▶

The cleaning electrode and cleaning felt are mounted as described from page 

24

onwards.

▶

Preparation of the workstation for polishing is the same as for cleaning (see page

31

).

Placing the clean-
ing torch in the
cleaning torch
holder

Place the cleaning torch with mounted cleaning electrode in the cleaning torch holder

1

1

38

Содержание MagicCleaner 150

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды