manualshive.com logo in svg

Fronius MagicCleaner 150, Руководство по эксплуатации

Поделиться
Скачать
Fronius MagicCleaner 150 Скачать руководство пользователя страница 12

General information

Device concept

MagicCleaner 150

The MagicCleaner 150 is a device for the
electrochemical surface treatment of stain-
less steel.

The following surface treatments can be
carried out:
-

Elimination of oxides and burns after
welding and cutting.

-

Polishing of welds

-

Printing - electrochemical surface
printing
(optional)

Intended use

The MagicCleaner 150 is intended exclusively for the electrochemical cleaning of stain-
less steel. Any other use is deemed to be "not in accordance with the intended purpose."
The manufacturer shall not be liable for any damage resulting from such improper use.

Intended use also means
-

Reading and understanding these Operating Instructions,

-

Reading and understanding all safety data sheets of the cleaning and Print electro-
lytes,

-

Carrying out all the specified inspection and maintenance work.

12

Содержание MagicCleaner 150

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды