manualshive.com logo in svg

Fronius IG Plus 100 V-1, Руководство по эксплуатации

Поделиться
Скачать
Fronius IG Plus 100 V-1 Скачать руководство пользователя страница 19

17

g

Protection of Persons and Equipment

Safety

Protection of Per-
sons and Equip-
ment

The design and function of the inverter offer a maximum level of safety, both during instal-
lation as well as operation.

The inverter provides operator and equipment protection through:

a)

galvanic isolation

b)

monitoring the grid

Galvanic isolation

The inverter is equipped with a high frequency transformer that ensures galvanic isolation 
between the DC side and the grid, thus ensuring the highest possible safety.

Monitoring the 
Grid

Whenever conditions in the electric grid are inconsistent with standard conditions (for ex-
ample, grid switch-off, interruption), the inverter will immediately stop operating and inter-
rupt the supply of power into the grid.

Grid monitoring is carried out using:

-

Voltage monitoring

-

Frequency monitoring

-

Monitoring islanding conditions

Warning notices 
affixed to the de-
vice

The inverter contains warning notices and safety symbols. These warning notices and 
safety symbols must NOT be removed or painted over. The notices and symbols warn 
against operating the equipment incorrectly, as this may result in serious injury and dam-
age.

WARNING!

If the equipment is used or tasks are carried out incorrectly, serious 

injury or damage may result. Only qualified personnel are authorized to install 
your inverter and only within the scope of the respective technical regulations. It 
is essential that you read the "Safety regulations" chapter before commissioning 
the equipment or carrying out maintenance work.

Содержание IG Plus 100 V-1









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды