68
Device Status
For displaying the measured insulation resistance
Time
Setting time and date
IMPORTANT!
The correct time and date is a prerequisite for the correct display of day and
year values and the day characteristic.
Frequency Limits:
FIL max
Upper inner grid frequency in Hz
FIL min
Lower inner grid frequency in Hz
FOL max
Upper outer grid frequency limit value in Hz
FOL min
Lower outer grid frequency limit value in Hz
LVFRT:
Status
Status of the LVFRT function (Low Voltage Fault Ride Through,
according to BDEW TR3 5.7)
DB min
Dead Band Value min.
Lower voltage limit as % for the reactive power feed
DB max
Dead Band Value max.
Upper voltage limit as % for the reactive power feed
k-Fac
Gradient showing how much reactive current is fed in as a func-
tion of voltage
P AC Reduction:
Max. P AC
Manual power reduction
GPIS
Softstart function
GFDPRv
Grid frequency-dependent power reduction in %/Hz
GFDPRr
Return to nominal output in %/s (following a grid frequency-in-
duced power reduction)
Display area
Messwertanzeige
PV Iso. (Value in MOhm)
Unit
HH:MM, DDMMYYYY
Setting range
Time/date
Factory setting
-
